Eternalight 3
Defends your environment against unwanted power outage and electrical disturbances by providing:
- DSPM Watchdog software always on guard.
- Display monitor keeps you in control 24/7.
- Dependable DSP/PWM technology for unsurpassed reliability.
- Economical for the lowest overall cost to your light safety with an Energy Star Rating.
- Temperature compensation technology that controls batteries for the longest battery life.
- Sealed maintenance-free batteries.
- Full light output for an entire 90 minutes.
- Self-diagnostics for a safe and secure lighted environment.
- Pure sine wave output for all types of lamps.
- ECM module is a patented technology used by DSPM.
- Backup solutions for multiple applications such as
- Indoor and outdoor emergency lighting
- Exits
- Cash registers
- Computers
- Strategic electronics
- And more
- 10 Year pro-rated battery warranty.
- 5 Year power train warranty.
- Listed to UL924, UL1778. and UL508.
- Cities of Chicago and New York approved.
- Complies with the Buy American Act.
Contact Us about DSPM Eternalight 3 Harsh
Product Snapshot
| Standard Power Levels (KW) | 0.075, 0.1, 0.125, 0.2, 0.3, 0.35, 0.525, 0.7, 0.875, 1.05, 1.4, 2.0, 2.4, 2.6, 3.0, 3.4, 3.8, 4.2, 4.7, 5.25, 7.0, 8.0, 10.0, 12.0, 14.0, 18.0, 21.0 |
| Crest Factor | 2:5:1 typical |
| Surge Protection | the unit will protect itself and the load against surges as defined in ANSI/IEEE C62.45 Category A and B |
Technical Specs
| Efficiency | ≥92% at 100% linear road |
| Audible Noise | <45dB measured on Response Curve “A” |
| ETL Listed | UL924 and UL1778 |
| Operating Temperature | -20° to 50° Celsius (-4° to 122°F) |
| Storage Temperature | -20° to 60° Celsius (-4° to 140°F) |
| Humidity | 5 – 100%; Non-condensing |
| Cabinet | NEMA-4 |
Input:
| Input Voltage | 120, 208, 240, 277, or 480 VAC |
| Input Voltage Range | +10% -15% |
| Input Protection | Input Main Circuit Breaker |
Output:
| Output Voltage | 120, 277, 480, 120/240 or 120/277 VAC |
| Output Voltage Regulation | ±3% for all loads and battery discharge mode |
| Output Frequency Range | 60 Hz, ±1% |
| Output Wave Form | Sine-wave <5% @ 100% linear load |
| Output Protection | Output Main Circuit Breaker |
Battery:
| Battery | Sealed maintenance-free (AGM) lead calcium |
| Recharge Current | Conforms to UL924 standards |
| External Battery | Provision for hardware connection of external battery cabinets or DC source |
PDFS
